Doubleweave Wool Blanket

My DH has been hinting that HE might like to have a nice couch blanket to get through the winter.  For his birthday his wish was granted.  I decided to make it 60" wide and that meant doublewidth since my widest loom is 45".  I kept it simple with a plain weave structure. This is my second attempt at doublewidth.

I used a mix of wool yarns from my stash, including some NZ wool and mystery skeins. A small amount (brown in the pic) was really more of a knitting yarn meaning it had a bit of a stretch.  This meant a little more caution to not over tension.

DH was very happy with the gift and enjoys it when there is sub-zero temps in the air.

Double-width Doubleweave Blanket Finish

 Just in time for the coming colder weather, the wool double width blanket is off the loom.  There was only ONE fix needed where the layers "crossed".  Easy fix with the wool weft.

The wet finish was done in a front loader using the wool wash setting.  I did check the progress at 10 mins but let it finish the entire cycle.  The amount of fulling was perfect.

In the first snapshot, you can see the overall look of the blanket.  Note the center line which was the fold for the two layers.

You can see the center line more clearly at the left of the second photo.  Even though the sett was a little more open by skipping dent during sleying, the end result looks like a design element.

I showed off my blanket at the guild meeting recently and was pleased that my talented friends also thought it was a success.

DoubleWeave DoubleWidth

Looms take up space, and large looms take up a lot of space.  With the possibility of downsizing "looming", I may have to give up either my 8-shaft 36" Harrisville, or my 4-shaft 45" LeClerc.  Not having an 8-shaft floor loom seems limiting.  And not having my LeClerc workhorse (think BABY BLANKETS) seems even more limiting.

I like to use 40"-45" for baby blankets.  Easily done on the LeClerc.  I decided to try a double width doubleweave project to see if my skills are up for doing blankets in TWO layers.  I have only done doubleweave samplers following the excellent instructions published by Jennifer Moore in her "DoubleWeave Basics Book".

I had a bin of wools that needed to be used (part of the downsizing) and so I planned a project for a large wool throw blanket.  I decided to use the LeClerc loom because the Harrisville had another project going.

I put on a width of ~33" as two layers. Since the LeClerc only has 4-shaft that meant each layer could only be plain weave.  The opening would be on the right and the 'crease' or midline, would be on the left.  I also sleyed the sett more loosely right at the midline, and added a nylon floating selvedge.

The challenge of doublewidth is to only join the layers at the midline.  In this case it was the left edge.  During the first 12" or so I checked my layers every few minutes by lifting the shafts for the top layer and peeking in the side.  After 12 inches I felt more confidence and just wove carefully (and more slowly).  I did find myself catching threads, but less frequently than I worried.

Sure, but the real test is when it is off the loom.  I was SO VERY HAPPY when I found only one small error where the layers were joined!  The fix was pretty quick and easy since it is loosely sett plain weave.

I need to finish the twisted fringe and wash to see how the midline will look.  I will post some additional pics with the completed blanket.